Toro HDX SD 2000 Serie Manuel De L'utilisateur page 15

Battery-Indicator Light
If you turn the key switch to the O position for a
N
few seconds, the battery voltage displays in the area
where the hours are normally displayed.
The battery light turns on when the key switch is
turned on and when the charge is below the correct
operating level (Figure 6).
Motion-Control Levers
Use the motion-control levers to drive the machine
forward, reverse, and turn either direction (Figure 4).
Neutral-Lock Position
Move the motion-control levers outward from the
center to the N - position when exiting
EUTRAL LOCK
the machine (Figure 25). Always position the
motion-control levers into the N - position
EUTRAL LOCK
when you stop the machine or leave it unattended.
Parking-Brake Lever
Whenever you shut off the engine, engage the parking
brake to prevent accidental movement of the machine.
Fuel-Shutoff Valve
Close the fuel-shutoff valve when transporting or
storing the machine; refer to Using the Fuel-Shutoff
Valve (page 29).
13