Télécharger Imprimer la page

Progress PK1041 Notice D'utilisation page 26

Masquer les pouces Voir aussi pour PK1041:

Publicité

Les langues disponibles

Les langues disponibles

26 Progress
If the advice does not lead to
the desired result, contact the
nearest Authorised Service
Centre.
Replacing the lamp
The appliance is equipped with
a long-life LED interior light.
It is strongly recommended to
use original spare parts only.
Use LED bulbs (E14 base)
only. The maximum power is
shown on the lamp unit.
CAUTION! Disconnect the plug
from the mains socket.
1. Using a screwdriver, remove the screw
from the lamp cover.
2. Detach the lamp cover in the direction
of the arrows.
TECHNICAL DATA
Product information sheet
Trade Mark
Model
Category
Energy efficiency class
Energy consumption in kWh per year, based on
standard test results for 24 hours. The actual energy
consumption will depend on how the appliance is
used and where it is located
Storage volume in litres, Fridge
3. Replace the lamp with the one that has
identical characteristics and is
specifically designed for household
appliances.
4. Reassemble the lamp cover.
5. Tighten the screw to the lamp cover.
6. Connect the plug to the mains socket.
7. Open the door.
Make sure that the light switches on.
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
assembly instructions.
3. If necessary, replace the defective
door gaskets. Contact the Authorised
Service Centre.
Progress
PK1041 923745017
7. Refrigerator-freezer
A+
205
147

Publicité

loading