Ducati MONSTER 620 2002 Manuel D'utilisation page 138

Suspensions
Front suspension
Hydraulic upside-down fork.
Stanchion diameter: 43 mm
Travel along leg axis: 130 mm
Rear
Of the progressive type, thanks to a rocker arm
connecting frame and upper pivot point of the shock
E
absorber and an arch connected at the bottom to
swingarm. The shock absorber enables the adjustment
of rebound and spring preload. At the bottom pivot point
it is connected to the swingarm, which is made of steel
or aluminium (620S only).
The swingarm hinges on a pivot pin passing through the
engine. The whole system gives the bike excellent
stability.
Travel: 65 mm
Rear wheel travel: 148 mm
Note
Never modify settings which may alter those
technical features which are essential for the motorcycle
homologation.
66
Electric system
Basic electric items are:
Round headlamp with iodine double filament bulb, 12V-
55/60W bulb.
Parking light with 12V-5W bulb.
Electric controls on handlebar.
Turn indicators, 12V-10W bulbs.
Warning horn.
Stop light switches.
Battery, 12V-10 Ah.
Generator, 12V-520W.
Electronic voltage regulator, protected by a 40 A fuse.
Starter motor, 12V-0.7 kW.
Tail light, 12V-5/21W double-filament bulb for rear stop
light and parking light, 12V-5W bulb for number plate
light.
Note
See "Replacing bulbs" on page 49 for relevant
instructions.