Publicité
Les langues disponibles
Les langues disponibles
Cleaning the motorcycle
To preserve the finish of metal parts and paintwork, wash
and clean your motorcycle at regular intervals, anyway
according to the road conditions you ride in.
Use specific products only. Prefer biodegradable
products. Avoid aggressive detergents or solvents.
Important
Do not wash your motorcycle right after use. When
the motorcycle is still hot, water drops will evaporate
faster and spot hot surfaces.
Never clean the motorcycle using hot or high-pressure
water jets.
Cleaning the motorcycle with water cleaners may lead to
seizure or severe failure of front fork, wheel hub
assembly, electric system, front fork seals, air inlets or
exhaust silencers and adversely affect the operation of
motorcycle safety features.
Clean off stubborn dirt or exceeding grease from engine
parts using a degreasing agent. Be sure to avoid contact
with drive parts (chain, sprockets, etc.)
Rinse with warm water and dry all surfaces with chamois
leather.
Warning
Braking performance may be impaired immediately
after washing the motorcycle. Never grease or lubricate
the brake discs. Loss of braking and further accidents
may occur.
Clean the discs with an oil-free solvent.
E
57
Publicité
