Publicité
Les langues disponibles
Les langues disponibles
Turn indicators (fig. 47)
A
Remove the screw (1) and detach the glass (2) from the
body.
The bulb is of the bayonet-type: press and rotate anti-
clockwise to remove. Fit the spare bulb by pressing and
1
turning clockwise until it clicks. Refit the glass sliding the
small tab (A) into the suitable slot in the indicator body.
Tighten the screw (1).
Stop light (fig. 48)
E
To replace the stop and parking light bulb, unscrew the
two screws (1) that secure the glass (2). Remove the
glass. The bulb is of the bayonet-type: press and rotate
2
anti-clockwise to remove. Fit the spare bulb by pressing
fig. 47
and turning clockwise until it clicks. Refit the glass.
Number plate light (fig. 48)
1
To expose the number plate bulb (3), withdraw the lamp
holder from inside, then extract the bulb and replace it.
2
3
fig. 48
51
Publicité
