Pilz PSEN op2 Série Manuel D'utilisation page 71

PSEN op 2/4 Series
Rigid mounting brackets are suitable for installations that require no
large mechanical adjustments during alignment. Adjustable brackets
enable the units to be inclined by ± 5° and are available on request.
Where applications are subject to particularly strong vibration we
recommend the use of angle brackets with vibration dampers.
The drawing and table below indicate the recommended fixing points
in relation to the length of the light curtain.
MODEL L (mm)
PSEN op4F/op4H*-015 246
PSEN op4F/op4H*-030 393
PSEN op4F/op4H*-045 540
PSEN op4F/op4H*-060 687
PSEN op4F/op4H*-075 834
PSEN op4F/op4H*-090 981
PSEN op4H*-105 1128
PSEN op4H*-120 1275
PSEN op4H*-135 1422
PSEN op4H*-150 1569
PSEN op4H*-165 1716
PSEN op2B-2-050 642
PSEN op2B-3-080 942
PSEN op2B-4-090 1042
PSEN op2B-4-120 1342
PSEN op4B-2-050 642
PSEN op4B-3-080 942
PSEN op4B-4-090 1042
PSEN op4B-4-120 1342
* op4F = Resolution 14 mm
op4H = Resolution 30 mm
Operating Manual
A (mm) B (mm) C (mm)
86 80 -
193 100 -
300 120 -
387 150 -
474 180 -
581 200 -
688 220 -
875 200 438
1022 200 510
1121 220 565
1216 250 608
342 150 -
542 200 -
602 220 -
942 200 472
342 150 -
542 200 -
602 220 -
942 200 472
18