Publicité
Les langues disponibles
Les langues disponibles
en Installation instructions
Make the cut-out for the exhaust pipe in the cabinet.
3.
Make the cut-out for the exhaust pipe in the interme-
4.
diate floor.
Make the recess for the mains connection.
‒
Ensure that the fitted unit is still stable after the cut-
5.
outs have been made.
Place the installation aid on the inside of the cabinet
6.
and mark the fixing points
Use a bradawl to mark the fixing points.
7.
28
.
For a wall thickness of 16 mm: Place the installation
8.
aids on the rails
and screw the rails into the side
walls of the cabinet
2
PZ
9.
For a wall thickness of 18 mm and 19 mm: Screw in
the rails without the installation aid.
Preparing the appliance
1.
Note:
¡ Avoid damaging sensitive surfaces when instal-
ling the appliance.
¡ For a cabinet depth (outer dimension) between
320 mm and 340 mm, use the narrow wall filler
strip.
¡ For a cabinet depth (outer dimension) between
340 mm and 360 mm, use the wide wall filler
strip.
Screw the lower wall filler strip onto the appliance.
.
20
Publicité
