Pilot Burner - OEM SG 99 Mode D'emploi Et D'entretien

Table des Matières

Publicité

Forno a gas
Mod.
Gas oven
Four à gaz
SG69 - 99
Gasofen
Horno a gas
PROBLEMS - CAUSES - SOLUTIONS
GB
PROBLEMS
Gas smell.
Smell of
unburnt gas.
Oven
condensation.

Pilot burner/

main ignition
burner goes
off.
Defective
combustion.
Pilot burner
does not come
on.
Delayed
igni-
tion, with
"burners
bursts".
Main burner
does not light
up, while pilot
burner stays
on.
CAUSES
• Leaks in the pipes.
• Obstructions in the hot
fumes circuit.
• Obstructions in the chi-
mney, or height or cross
sections not suitable
for the oven.
• Check that the ignition
burner flame is strong
enough to heat up the
thermocouple.
• Burners flames are too
high, or too low, or yel-
low.
• Air present in the gas
circuit, especially after
a period of inactivity.
SOLUTIONS
• Outer piping must be checked in a suit
able way, i.e. with soapy water, not directly
with any flame (there is a risk of accidents
or explosions, especially with GPL gases).
• Make sure the chimney flue is not ob
structed and its height and cross section
are suitable for the oven.
• Make sure gas consumption is not exces-
sive.
• Check combustion.
• Make sure the oven is not working on too
low temperatures.
• Check that burners flames are working
regularly.
• Adjust, if necessary, the pilot burner.
• Make sure of the good working of the elec-
tric valve unit.
• In the first two instances, check the gas
pressure (on the ramp pressure outlet) and
the nozzles diameter. In the third instance,
make sure the burners holes are clean.
• Should no gas come through, make sure
the nozzle hole is not obstructed. The elec-
trode may also be incorrectly positioned.
• Check gas pressure (15 - 18 mbar METH-
ANE GAS "G20 - G25")
• Make sure the ignition burner (pilot) is not
too far away from the main burners and
that the ignition flame is not too short.
• Check the main switch, and the thermo-
stat. These must be on and working regu-
larly.
• Make sure that power is on and that there
is continuity in the electric valve coil.
104
MANUALE D'USO E MANUTENZIONE
OPERATING AND SERVICE MANUAL
MODE D'EMPLOI ET D'ENTRETIEN
BEDIENUNGS- UND WARTUNGSHANDBUCH
MANUAL DE USO Y MANTENIMIENTO

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sg 69

Table des Matières