Eurosystems PN 120 Manuel D'utilisation Et D'entretien page 38

Pressure can damage the electrical
system. Avoid excessive use of water
or the use of water near sensitive parts
such as the motor, batteries, labels, and
electrical systems.
6.3. GREASING [ fig. 11]
Every 25-30 hours working hours grease
the oscillation/rotation pins using the gre-
asers [29].
6.4. REPLACING OF THE RUBBER
STRIP
Please contact an authorized eurosystems
dealer.
7. STORAGE
CARE!
Park the accessory/tool (with or without
the connected machine) on stable
ground.
Short or long term storage:
1. Clean the accessory properly;
2. Cover the accessory/tool with a
nylon or fabric cover;
EN-14