Eurosystems PN 120 Manuel D'utilisation Et D'entretien page 25

TABLE OF CONTENTS
1. General information
1.1. Introduction
1.2. How to read the manual
1.3. Storage of the manual
1.4. Designation of parts
1.5. Description and Area of use
1.6. Non-intended use of the
machine
1.7. General information
1.8. Manufacturer and machine data
1.9. Symbols used in the
manual
1.10. Definitions
2. Safety instructions
2.1. Work area and hazard zone
2.2. Clothing
2.3. Explanations of hazard signs and
labels on the accessory/tool
3. Accessory specifications
4. Instructions for handling of the packa-
ging and machine
4.1. Packaging handling
4.2. Unpacking the machine
4.3. Lifting
4.4. Handling
5. Instructions for use
5.1. Assembly completion
5.1.A Tightening of the
extension tube
5.1.B. Ballast assembly
5.2. Coupling the tool/accessory
5.3. Uncoupling the tool/accessory
5.4. Working height
adjustments
EN-02
5.5. Inclination adjustment
EN-02
5.6. Preliminary checks to be made
EN-02
each time before starting
EN-02
the machine
EN-03
5.7. Use
EN-03
5.8. Cleaning during the
working day
EN-03
6. Maintenance
EN-03
6.1. Maintenance plan
EN-04
6.2. Cleaning and washing
6.3. Greasing
EN-04
6.4. Replacement
EN-05
7. Storage
EN-05
8. Faults
EN-05
9. Additional instructions
EN-06
9.1. Disposal
9.2. Decommissioning and
EN-06
dismantling
EN-07
EN-07
EN-07
EN-07
EN-07
EN-08
EN-08
EN-08
EN-08
EN-08
EN-09
EN-10
EN-10
EN-10
EN-10
EN-11
EN-11
EN-12
EN-13
EN-13
EN-14
EN-14
EN-14
EN-15
EN-16
EN-16
EN-16
EN-1