Eurosystems PN 120 Manuel D'utilisation Et D'entretien page 31

3. ACCESSORY SPECIFICATIONS
1. Package dimensions: 122x59xH49
(cm.)
2. Accessory dimensions: (min.)
120x115xH115 (cm.)
3. Accessory dimensions: (max)
120x161xH135 cm
4. Weight:
a. Accessory/tool: 51 Kg
b. Packed accessory/tool: 53 Kg
4. INSTRUCTIONS FOR HANDLING OF
THE PACKAGING AND MACHINE
DANGER!
Always wear safety shoes and gloves
for all handling operations.
4.1. PACKAGING HANDLING
To move the packaging, use a forklift
truck with forks as shown in
weight of the packaging with the machine
included is specified in the paragraph
named "Machine Specifications".
4.2. UNPACKING THE MACHINE
The machine is supplied packaged unless
agreed otherwise.
How to remove it from the packaging:
4.3. LIFTING
Only use systems, devices and instru-
ments that are suitable for lifting mass-
es that are equal or above what is in-
dicated in the "Machine Specifications"
chapter.
Do not walk or remain under moving
loads.
[ fig. 03] Do not use lifting systems or devices
with sharp parts.
[ fig. 03 ] . The
Before using lifting ropes or bands,
check how strong they are. In case of
damage, even partial they must be re-
placed.
Never lift the machine when it is con-
nected to an accessory or tool.
• Cut or tear the cardboard at the
base of the pallet and remove it com-
pletely by raising it;
• Cut any ties on the bottom;
[ fig. 01]
DANGER!
DANGER!
CARE!
DANGER!
CARE!
EN-7