Eurosystems PN 120 Manuel D'utilisation Et D'entretien page 37

6.1. MAINTENANCE PLAN
When What
After each
Operator
use
Every 25-30
working Operator
hours
6.2. CLEANING AND WASHING
Clean and wash the accessory/tool after
each use.
Cleaning:
It is possible to clean the accessory/tool
using compressed air.
CARE!
Under no circumstances the protection
covers can be removed from the ma-
chine.
Washing:
Carefully wash the surfaces dirty of snow/
mud/grass etc..
DANGER!
Do not use pressurised water to wash
the accessory/tool when connected
or in close proximity to the machine.
Who
Cleaning
Lubricate the oscillation/rota-
tion pins
Reference
Accessory operation
and maintenance manual
"CLEANING" paragraph
Instructions service/ booklet for
tool/accessory par. "GREASING"
EN-13