Publicité
Les langues disponibles
Les langues disponibles
4.2 UNPACKING
The machine is supplied packaged unless
otherwise agreed.
How to remove it from the packaging:
• Cut or tear the cardboard at the base
of the pallet and remove it completely by
raising it;
• Cut any ties on the bottom;
After reading and fully understanding the
user's manual of the machine P130 and
the equipment, connect the equipment to
the machine. Alternatively, lift it by follow-
ing the instructions in the "Lifting" para-
graph.
4.3 LIFTING
DANGER!
Only use systems, devices and instru-
ments that are suitable for lifting masses
that are equal or above what is indicated
in the "Machine Specifications" chapter.
DANGER!
Do not walk or remain under moving loads.
CAUTION!
Do not use lifting systems or devices with
sharp parts.
16
DANGER!
Before using lifting ropes or bands, check
how strong they are. In case of damage,
even partial they must be replaced.
CAUTION!
Never lift the machine when it is connect-
ed to an accessory or tool.
Lift the interchangeable equipment using
only the tightening points shown in
4.4 PARKING
Always park the equipment as shown
in
[ fig. 06 ]
.
DANGER!
Make sure the easel to be securely fixed.
5. INSTRUCTIONS FOR USE
DANGER!
Before the assembly and the put in use of
the unit, please read and completely un-
derstand the present user's manual in its
entirety and the machine user's manual.
DANGER!
Before operating the brush check the ori-
entation and effectiveness of the protec-
tive cover
[fig. 19]
.
[fig. 05]
.
Publicité
