Télécharger Imprimer la page

Eurosystems SV 60 Manuel D'utilisation Et D'entretien page 25

Publicité

Les langues disponibles
  • FR

Les langues disponibles

INFORMATION!
This symbol highlights special indica-
tions for better clarity and ease of use.
1.4 AREA OF USE
Interchangeable vertical brush weeding
equipment for multi-purpose machine P130
can be used to clean flat private surfaces
(for example driveways, parking lots, etc.)
from dirt, earth or weeds. Depending on
the type of mounted brush is possible to
operate on different types of ground such
as asphalt, self-locking paving and earth.
We recommend what follows:
• Plastic brush: suitable for the dust or
soil from surface and delicate floorings.
• Brush equipped with thin metal bristles:
it is suitable for the weeds and dust from
self-locking paving and/or asphalt.
• Brush equipped with big metal bristles:
is suitable for the cleaning of weeds and
dust from self-locking paving, asphalt and
non delicate floorings. Suitable for the clean-
ing of corners. It acts in depth and it is very
aggressive on all surfaces. Not suitable to
use near delicate surfaces.
ATTENZIONE!
Considering the load which is adjusted
on the brush and the type of bristle used
the present interchangeble pavings could
damage or leave marks on the floorings.
1.5 IMPROPER USE
The present interchangeable equipment
was studied, designed and manufacture
using the best possible technology to op-
erate in conditions of maximum safety, in
conformity
to the current accident pre-
vention regulations. All is described
however subject to correct use and accu-
rate maintenance. Please refer to chapter:
"SAFETY ISTRUCTIONS" for additional in-
formation and/or prohibitions.
1.6 GENERAL INFORMATION
Only use genuine Eurosystems parts. The
user loses all warranty rights in case of
use of non-genuine parts.
Do not make structural changes or ad-
aptations to the equipment or to the ma-
chine. Such changes will void the warran-
ty and the manufacturer will decline any
responsibility.
We reserve the right to make construction-
al improvements to the machine without
modifying the current instructions.
W
is
13

Publicité

loading