C) Photo /Video Function; D) Detachable Monitor - VOLTCRAFT BS-300XRSD Notice D'emploi

Endoscope wireless
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

c) Photo /video function

Photo
• Press the MENU button to select the menu.
• Select the menu point "Camera" with the ↓ or ↑ buttons and press it to activate the release
button . The photo camera symbol appears on the top left of the monitor.
• Now press the release button to take a photo.
Video
• Press the MENU button to select the menu.
• Select the menu point "DVR" with the ↓ or ↑ buttons and press it to activate the release
button . The video camera symbol appears on the top left of the monitor.
• Now press the release button to record a video.
• Press the release button again to end the video recording.
Playback
• Press the MENU button to select the menu.
• Select the menu point "Playback" with the ↓ or ↑ buttons and press it to activate the release
button.
• The photo/video last taken is displayed on the monitor.
• Select the desired photo/video with the ↓ or ↑ button.
The video playback is automatically started. Press the trigger button during the playback if
you want to interrupt the video. Press the trigger button again to keep the video running.

d) Detachable monitor

If required you can re move the monitor from the endoscope. The camera picture is then
transmitted wirelessly to the monitor. Proceed as follows to do so:
• Push the monitor upwards in the direction of the goose neck and remove the monitor.
• Now switch on the endoscope. The camera picture appears on the monitor.
• Push the monitor to be installed downwards.
Do not remove the monitor if the battery is charged. Otherwise the system is stopped and
the product should be reset by pressing the reset button at the rear of the monitor.
32

Publicité

Table des Matières
loading

Table des Matières