H) Reset Button; Maintenance And Care; Declaration Of Conformity (Doc) - VOLTCRAFT BS-300XRSD Notice D'emploi

h) RESET button

• If the monitor does not function correctly or if the monitor picture no
longer moves press the RESET button on the back of the monitor.
Use a paper clip or something similar for this purpose.

14. MAINTENANCE AND CARE

• The product does not require any maintenance, do not disassemble it. Maintenance or
repairs may be carried out by a professional only.
• Do not clean the product if the rechargeable battery of the monitor is charged.
• First remove all the batteries/rechargeable batteries from the charging slots.
• Clean the exterior of the product using a clean, soft, dry cloth only. You can easily remove
dust using a clean, soft brush or a vacuum cleaner.
• After use in liquids, always thoroughly rinse the camera neck with clean water and dry
before storing the product in the case.
• To clean the camera lens, use a small brush or cotton swabs.
• Do not use any aggressive cleaning agents or chemical solutions as these may damage the
housing causing discoloration and/or malfunction.

15. DECLARATION OF CONFORMITY (DOC)

We, Conrad Electronic, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that this
product conforms to the fundamental requirements and the other relevant regulations of the
directive 1999/5/EC.
The Declaration of Conformity for this product can be found at www.conrad.com.
34
Position of the opening
for the RESET button.