Publicité
Les langues disponibles
Les langues disponibles
Introduction
WARNING:
understand the safety chapter
before you do maintenance work on
the product.
WARNING:
before you do maintenance on the
product.
Maintenance
Clean the external parts of the prod-
uct with a dry cloth. Do not use wa-
ter.
Check the saw chain with regard
to visible cracks in the rivets and
links, whether the saw chain is stiff
or whether the rivets and links are
abnormally worn.
Make sure that the start and stop
button works correctly and are not
damaged.
Make sure that the power trigger and
the power trigger lockout function
correctly from a safety point of view.
Make sure that all controls work and
are not damaged.
Keep the handles dry and clean.
Makes sure that that there is no oil
and grease on the handles.
Make sure that the saw chain cover
is not damaged. Replace the saw
chain cover if it is damaged.
Make sure that the screws and nuts
are tight.
Clean the oil tank cap
Make sure that the battery release
buttons on the battery works and
locks the battery in the product.
Examine that the battery charger is
not damaged and function correctly.
20
Maintenance
Read and
Remove the battery
Maintenance schedule
WARNING:
before you do maintenance.
The following is a list of the maintenance
steps that you must do on the product. Refer
to the tasks in the maintenance chapter for
more information.
Daily
Weekly
X
X
X
X
X
X
X
X
X
X
X
Remove the battery
Monthly
1824 - 007 - 02.05.2023
Publicité
