Publicité
Les langues disponibles
Les langues disponibles
2. If the warning indicator on the display is on
or flashes, refer to
To do a check of the power trigger lockout
The power trigger lockout is designed to
prevent accidental operation. When you push
the power trigger lockout forward (1) and then
press the power trigger lockout against the
handle (2), the power trigger (3) is released.
When you release the handle, the power
trigger and the power trigger lockout both
move back to their original positions. This
movement is operated by three independent
springs.
3
1. Make sure that the power trigger is locked
when the power trigger lockout is in its
original position.
1824 - 007 - 02.05.2023
Keypad on page 27 .
2
1
2. Press the power trigger and make sure it
returns to its original position when you
release it.
3. Make sure that the power trigger and the
power trigger lockout moves freely and that
the return spring operates correctly.
4. Start the product, refer to
product on page 17 .
5. Apply full speed.
6. Release the power trigger and make sure
that the cutting attachment stops and
remains still.
Safety instructions for the cutting equipment
WARNING:
instructions that follow before you
use the product.
•
Only use approved guide bar/saw chain
combinations and filing equipment. Refer
Filing equipment and filing angles on
to
page 30 for instructions.
•
Use protective gloves when you use or
do maintenance on the saw chain. A saw
chain that does not move can also cause
injuries.
•
Keep the cutting teeth correctly sharpened.
Obey the instructions and use the
recommended file gauge. A saw chain
that is damaged or incorrectly sharpened
increases the risk of accidents.
•
Keep the correct depth gauge setting.
Obey the instructions and use the
recommended depth gauge setting. Too
2
1
To start the
Read the warning
11
Publicité
