Husqvarna MADSAW 525iDEPS Manuel D'utilisation page 15

3. Push and hold the release button.
4. Carefully push the shaft into the coupling
until you hear a click. Make sure that
the release button go into the hole in the
coupling.
5. Tighten the knob fully.
1824 - 007 - 02.05.2023
To disassemble the shaft
1. Turn the knob 3 turns or more to loosen
the coupling.
2. Push and hold the release button.
3. Hold tight to the end of the shaft segments
that you are to remove.
4. Pull the shaft straight out of the coupling.
15