Publicité
Les langues disponibles
Les langues disponibles
large depth gauge setting increases the
risk of kickback.
•
Make sure that the saw chain has the
correct tension. If the saw chain is not
tight against the guide bar, the saw chain
can derail. An incorrect saw chain tension
increases wear on the guide bar, saw
chain and chain drive sprocket. Refer to
tension the chain on page 25 .
•
Do maintenance on the cutting equipment
regularly and keep it correctly lubricated. If
the saw chain is not correctly lubricated,
the risk of wear on the guide bar, saw
chain and chain drive sprocket increases.
Safety instructions for the dielectric shaft
WARNING:
instructions that follow before you
use the product.
•
The product is tested to meet OSHA
1910.269(j) standards.
•
If the product is used within 11m (36 ft)
of electrical hazards, it must be used by
approved and qualified personnel only per
OSHA 1910.269(r).
•
Untrained and non-professionals: Do not
use within 11m (36 ft) of electrical hazards.
•
Clean and do the correct servicing on the
dielectric shaft to help keep the electrical
insulation properties.
12
To
Read the warning
•
Keep the dielectric shaft clean and dry
when you do work around energized
electrical power lines. Oil or dirt decreases
the electrical insulation properties of the
dielectric shaft.
•
Obey local regulations.
•
The tool must be clean, dry, and work
correctly before use.
•
Follow all company procedures.
•
Use only approved dielectric bar oil.
Battery safety
WARNING:
instructions that follow before you
use the product.
•
Only use the batteries that we recommend
for your product. The batteries are
software encrypted.
•
Use the batteries that are rechargable as
a power supply for the related Husqvarna
products only. To prevent injury, do not
use the battery as a power supply for other
devices.
•
Risk of electrical shock. Do not connect the
battery terminals to keys, screws or other
metal. This can cause a short circuit of the
battery.
•
Do not use batteries that are non-
rechargable.
•
Do not put objects into the air slots of the
battery.
•
Keep the battery away from sunlight, heat
or open flame. The battery can cause
burns and/or chemical burns.
•
Keep the battery away from microwaves
and high pressure.
•
Do not try to disassemble or break the
battery.
•
Do not let battery acid touch your skin.
Battery acid causes injuries to the skin,
corrosion and burns. If you get battery acid
in your eyes, do not rub but flush with
water for minimum 15 minutes. If battery
acid has touched your skin, you must clean
the skin with a large quantity of water and
soap. Get medical aid.
•
Use the battery in temperatures between
-10 °C (14 °F) and 40 °C (104 °F).
•
Do not clean the battery or the battery
charger with water. Refer to
the product, the battery and the battery
charger on page 21 .
Read the warning
To clean
1824 - 007 - 02.05.2023
Publicité
