Dräger Polytron 6100 EC WL Notice D'utilisation page 38

en |
Operation
®
3.2.2 Dräger Polytron Repeater WirelessHART
®
The Dräger Polytron Repeater WirelessHART
®
Polytron 6100 EC WLwithout measuring function.
3.3 Sensors
The gas detector is intended for use with the DrägerSensor
(electrochemical). Select the sensor according to the target gas to be
measured.
3.4 Interfaces
Interface
®
WirelessHART network
®
Bluetooth
3.5 Intended use
®
3.5.1 Dräger Polytron 6100 EC WL
The gas detector is used in conjunction with the built-in DrägerSensor
monitoring toxic gases and oxygen.
®
3.5.2 Dräger Polytron Repeater WirelessHART
The repeater is used to forward data from other WirelessHART
participants.
3.6 Approvals
The approvals are shown on the name plate. A copy of the name plate and the
declaration of conformity can be found in the document "Notes on Approval"
(order no. 93 00 532).
38
®
®
is a version of the Dräger
®
EC
Connection via the network (see "Network
integration", page 43).
®
Connection to a Windows terminal device
®
in the field (see "Bluetooth interface",
page 39).
®
®
®
network
Instructions for use |
Dräger Polytron
4 Operation
Task
Activate the Blue-
®
tooth interface.
Reset the gas
detector.
Reset the battery
counter.
If the gas detector is operated by a battery, do not remove the battery box
during configuration.
4.1 LED display
Symbol LED display
Green LED
flashes once
for
Yellow LED
flashes once
Yellow LED lights
up continuously
®
6100 EC WL, Dräger Polytron
® ®
Bluetooth WirelessHART
(PolySoft) network
(DD/DTM)
-
Meaning
Gas detector is switched on
Alerts (e.g., low battery or sensor warm-up
phase active) or maintenance mode
Error
®
Repeater WirelessHART
Magnetic pen
®