Ambu aScope 4 Broncho Serie Mode D'emploi page 12

Suction connector
Connecting tube ID [mm]
Sterilisation
Method of sterilisation
Operating environment
Temperature [°C, (°F)]
Relative humidity [%]
Atmospheric pressure [kPa]
Altitude [m]
1. Please be aware that the bending angle can be affected if the insertion cord is not kept straight.
2. There is no guarantee that accessories selected solely using this minimum instrument channel
width will be compatible in combination.
3. Storage under higher temperatures may impact shelf life.
6. Trouble shooting
If problems occur with the system, please use this trouble shooting guide to identify the cause
and correct the error.
Problem
No live image on
the left side of the
screen but User
Interface is present
on the display or the
image shown to the
left is frozen.
Low picture quality.
12
Ø 6.5 – 9.5
aScope 4 Broncho Slim/Regular/Large
ETO
aScope 4 Broncho Slim/Regular/Large
10 – 40 (50 – 104)
30 – 85
80 – 106
≤ 2000
Possible cause
The endoscope
not connected to
the displaying unit.
The displaying unit
and the endoscope
have communication
problems.
The endoscope
is damaged.
A recorded image is
shown in the yellow
file management tab.
Blood, saliva etc. on
the lens (distal tip).
Recommended action
Connect an endoscope to the blue port
on the displaying unit.
Restart the displaying unit by pressing
the power button for at least 2 seconds.
When the displaying unit is off restart by
pressing power button once more.
Replace the endoscope with a new one.
Return to live image by pressing the
blue live image tab or restart the
displaying unit by pressing the power
button for at least 2 seconds. When the
displaying unit is off restart by pressing
power button once more.
Gently rub the distal tip against the
mucosa. If the lens cannot be cleaned
this way remove the endoscope and
wipe the lens with sterile gauze.