Télécharger Imprimer la page

Amitek AK101BB Manuel D'installation, Utilisation Et Entretien page 24

Publicité

Les langues disponibles

Les langues disponibles

3.2 Residual risks
Overturning: If the requirement to place the appliance on a stable work surface and in a properly
level position is not complied with, injuries may occur if the appliance (or parts of it) overturns dur-
ing operation.
Direct contact with live parts: If the plug is not disconnected before cleaning or servicing the appli-
ance, the operator may suffer injuries due to direct contact with live parts.
Indirect contact: If the appliance is connected to an electrical socket which is not protected against
indirect contact in accordance with the regulations in the country of use, the operator may suffer
injuries due to indirect contact with live parts.
4. Environmental notes
The appliance has been designed for use in an environment at a temperature between +15 °C and
+30 °C and a relative humidity between 30% and 60%. Use of the appliance at a different tempera-
ture and/or humidity can result in unexpected operating anomalies and faults of the appliance, as
well as a slight decrease in its performance.
4.1 Packaging
The appliance is contained in packaging composed of a pallet, a cardboard box, polystyrene and
wood protections and plastic film. The weights and dimensions are indicated in Table 1 - Section 9.
For disposal, refer to the legislation in force in the country of installation.
We remind you that the packaging can be useful for storing the appliance, during a move or for
shipping the appliance for repair or maintenance to the retailer or manufacturer. The presence of
all the original packaging is essential if a request is made for replacement or repairs under the appli-
ance's warranty. Remove all internal and external packaging material before starting the appliance.
4.2 Storage
The packaging must be kept closed until the moment the appliance is installed, and the positioning
and storage markings on the packaging must be respected during storage.
The packaged appliance must always be stored in the following conditions:
Do not store outdoors;
Store in a dry place, protecting it from dust and keep it at a temperature of between 0 °C and
+50 °C and a relative humidity of between 30% and 80%;
Do not expose to aggressive agents;
protect from sunlight;
Avoid impacts;
If stored for a prolonged period of time (more than three months), regularly check the condi-
tion of all the packaging.
4.3 Disposal
The appliance falls within the scope of Directive 2012/19/EU on the management of Waste Electrical
and Electronic Equipment (WEEE). For the disposal of the appliance, as it is made up of materials
that can be recycled at the appropriate facilities, it is necessary to make sure to entrust it to special-
ized companies for both the transport and the treatment of waste. For this purpose, it is necessary
to search for companies capable of receiving the appliance for disposal and its subsequent proper
recycling.
- 24 -
TRANSLATION OF THE ITALIAN ORIGINAL INSTRUCTIONS

Publicité

loading