Stalgast 803021 Notice D'instruction page 29

3. TECHNICAL DATA
Unit's equipment (page 2):
1 - Handle, 2 - Hood, 3 - Basket guide, 4 - Control panel, 5 - Body, 6 - Adjustable feet, 7 - Power
supply, 8 - Water supply, 9 - Drain hose
Model
Dimensions (WxDxH)
Supply voltage
Frequency
Maximum power consumption
Water supply pressure
Water supply temperature
Water hardness in the water supply system
Water consumption
Boiler capacity
Maximum water level in the chamber
Tank capacity
Standard cycle duration*
Noise level
Protection
Net weight
Type of power cable
Washing water temperature
Rinse temperature
The dishwasher has an automatic steam function (integral part of the washing cycle).
* The duration of the cycle is given for the supply water temperature of 50 °C.
4. INSTALLATION
4.1. Setting the appliance
The appliance must be delivered to the installation site, unpacked, and its condition should be chec-
ked. In case of damage to the appliance or any of its components, the shipping company must be
notified immediately.
Connections to the devices must conform to the standards in force at the installation site. The ma-
nufacturer is not liable for any injury or damage to the product resulting from failure to comply with
the standards in force at the installation site. Before installing the appliance, make sure that the mo-
isture-sensitive components are properly protected against wetting, e.g.: during the washing of the
appliance.
The appliance should be set at a desired location and then the protective packaging should be remo-
ved. The appliance should be leveled using a spirit level and the four adjustable feet, thus ensuring
stable operation. Any other way of leveling the appliance should be approved by the manufacturer.
The packaging materials should be kept away from children and pets, as they can cause an accident.
All materials used to pack the product are environmentally friendly and can be safely stored in a suita-
ble place.
Recyclable components are marked as follows:
• PE – polyethylene: external packaging components, manual jacket, fastening components;
• PP – polypropylene: grips;
• Wooden and cardboard components must be left in places intended for this purpose in accordance
with applicable law.
It is forbidden to store the appliance and its components directly in the environment.
4.2. Conditions for connection to the mains:
Check that the mains voltage corresponds to the voltage indicated on the appliance nameplate. The
unit should be connected to a mains earth line in accordance with regulations and standards.
803021V02
728x816x1505 mm
400V/3+N+PE
50 Hz
10,8 kW
200-400 kPa
max. 55 °C
5-6 °dH
2,5 l/cycle
9,5 l
175 mm
20 l
120/180 s
65 dB(A)
IPX1
94 kg
H07RN-F 5x2,5mm
55 °C (131 °F)
30-90 °C (86-194 °F)
- 29 -
803035V02, 803036V02,
803037V02
90/120/180 s
96,5 kg
2
60-65 °C (140-149 °F)
82-90 °C (181-194 °F)