Publicité
Les langues disponibles
Les langues disponibles
MENU SCREEN
TIME CODE menu
Items
TC
CLEAR
NDF/DF
(NTSC
)
ONLY
TC DUPLICATE
TC ADJUST (DV)
PAGE BACK
E-62
Contents of the menus
–
Setting
Presets the time code:
For details, please refer to Page 36 "Presetting Time Codes".
CANCEL
Use this menu item to choose whether to clear the time code values:
EXECUTE
CANCEL
EXECUTE
NDF
Select the framing mode for the time code generator:
DF
NDF : Sets the unit to the non-drop mode. Use this setting when
DF
: Sets the unit to the drop-frame mode. Use this setting for
OFF
Use this menu item to select the type of time code to be recorded
AUTO
for DV signal input:
NON DROP
OFF
AUTO
NON DROP : Records the time code input to the DV IN terminal.
OFF
Use this menu item to set the timing to output time codes from the
+1F
9PIN remote terminal of the main unit to the editing remote con-
+2F
troller:
–2F
OFF : Usually, this is selected.
–1F
+1F
: Sets the timing to 1 frame faster.
+2F
: Sets the timing to 2 frames faster.
–2F
: Sets the timing to 2 frames slower. Use this setting when
–1F
: Sets the timing to 1 frame slower.
Return to the top MENU.
Contents
: Do not clear.
: clear.
the number of frames of the time code is important.
real-time based time codes.
: Records the time codes of the built-in time code
generator of the main unit.
: Records the time code input to the DV IN terminal.
The framing mode of the time code will be auto-
matically set to the framing of the input time code.
The framing mode of the time code will be fixed as
non-drop framing.
Use this setting when dubbing on tapes recorded
with BR-DV600, GY-DV500, GY-DV550, or GY-
DV700W in the non-drop frame mode. (NTSC only)
editing video or audio using DV signals.
– (continued)
Publicité
