JVC BR-DV600AE Mode D'emploi page 13

OPERATE
Mini
PROFESSIONAL
MIC
$
Indicator
: When a cassette is loaded, the LED
lights up green. (Likewise when the
unit is in the OPERATE OFF state.)
When a cassette is being loaded
or ejected, the LED blinks.
DVCAM : When the unit plays back a tape re-
corded in the DVCAM format, the
LED lights up green.
NTSC : The LED lights up green in the fol-
lowing cases:
• In the composite video or YC video
signal input mode and the
NTSC/PAL switch located at the
rear panel (
"NTSC".
• A tape recorded with NTSC sig-
nals is played back.
• When NTSC system DV signals
are input while the INPUT SEL.
switch is set at "DV".
PAL : The LED lights up green in the fol-
lowing cases:
• In the composite video or YC video
signal input mode and the
NTSC/PAL switch located at the
rear panel is set as "PAL".
• A tape recorded with PAL signals
is played back.
• When PAL system DV signals are
input while the INPUT SEL. switch
is set at "DV".
REC INH : The LED lights up red for about 5
seconds when the unit is set to the
recording mode but fails to record.
E.g. when the rear slide of the cas-
sette is pushed to the "SAVE" posi-
tion.
%
A.DUB
CH-1/3
REMOTE SEL. INPUT SEL.
CH-2/4
SERIAL LINE
9PIN WIRELESS DV Y/C
☞
Page 14) is set as
$ ^
DVCAM NTSC PAL REC INH.
BR-DV3000
%
Audio indicator
This indicator allows the user to check the avail-
ability of audio signals.
3 indicators each are available to CH1/3 and
Ch2/4.
^
Sensor for wireless remote controller
When using the provided wireless remote con-
troller, please point it to this sensor.
☞
( Page 25, "Using the wireless remote con-
troller")
2
2
EJECT
MENIU
REC PLAY PAUSE
SET
REW
STOP FF
E-13