JVC AV28WT5EP Manuel D'instructions page 6

709#/,1.#)81&7,216 709#/,1.#)81&7,216
709#/,1.#)81&7,216 709#/,1.#)81&7,216
When a T-V LINK compatible VCR is connected to the EXT-
2 Terminal on the TV, it is easier to set up the VCR and to
view videos. T-V LINK uses the following features:
To use T-V LINK functions:
A T-V LINK compatible VCR is necessary.
The VCR must be connected to the EXT-2 terminal on the TV
by a fully wired SCART cable.
Note:
• A "T-V LINK compatible VCR" means a JVC VCR with the
T-V LINK logo or a VCR with one of the following logos.
However, these VCRs may support some or all of the fea-
tures described below. For details, refer to your VCR in-
struction manual.
"Q-LINK" (a trademark of Panasonic Corporation)
"Data Logic" (a trademark of Metz Corporation)
"Easy Link" (a trademark of Phillips Corporation)
"Megalogic" (a trademark of Grundig Corporation)
"SMARTLINK" (a trademark of Sony Corporation)
3UH0VHW#'RZQORDG 3UH0VHW#'RZQORDG
3UH0VHW#'RZQORDG 3UH0VHW#'RZQORDG
Download the registered data on the TV channels from the TV
to the VCR.
The Preset Download function automatically begins when the
initial setting is complete or whenever the AUTO PROGRAM
or EDIT/MANUAL operations are performed.
Note:
• This function can be operated via VCR operation.
When "FEATURE NOT AVAILABLE" is displayed:
If "FEATURE NOT AVAILABLE" is displayed, the download
was not performed correctly. Before trying to download again,
ensure the following:
• The VCR power is turned on.
• The VCR is T-V LINK compatible.
• The VCR is connected to the EXT-2 terminal.
• The SCART cable is fully wired.
'LUHFW#5HF 'LUHFW#5HF 'LUHFW#5HF 'LUHFW#5HF
"What You See Is What You Record"
You can record to VCR the images that you are currently
viewing on TV by a simple operation.
For details, read the manual for your VCR.
Operate via the VCR. "VCR IS RECORDING" is displayed.
In the following conditions, the VCR will stop recording if
the TV is turned off, if the TV channel or input is switched,
or if the menu is displayed on the TV:
• When recording images from an external device connected
to the TV.
• When recording a TV channel after it has been unscrambled
on a decoder.
• When recording a TV channel by using the TV's output be-
cause that TV channel cannot be properly received on the
VCR's tuner.
Note:
• Operation via the TV is not possible.
• Generally, the VCR cannot record a TV channel that can-
not be received properly by the VCR's tuner, even though
you can view that TV channel on the TV. However, some
VCRs can record a TV channel by using the TV's output
if that channel can be viewed on the TV, even though the
TV channel cannot be received properly by the VCR's
tuner. For details, refer to your VCR instruction manual.
79#$XWR#3RZHU#2Q29&5# 79#$XWR#3RZHU#2Q29&5# 79#$XWR#3RZHU#2Q29&5# 79#$XWR#3RZHU#2Q29&5#
,PDJH#9LHZ ,PDJH#9LHZ
,PDJH#9LHZ ,PDJH#9LHZ
When the VCR starts playing, the TV automatically turns on
and the images from EXT-2 terminal are displayed on the
screen.
When the VCR menu is operated, the TV automatically turns
on and the images from EXT-2 terminal are displayed on the
screen.
Note:
• This function does not operate if your TV's main power is
turned off. Set your TV's main power to on (standby
mode).
8