Publicité
1. Maximum level mark
3. Dipstick
1. Repère de niveau maximum
3. Jauge
4. Bouchon de remplissage de l'huile moteur
1. Marca de nivel máximo
3. Varilla de medición
4. Tapón de llenado de aceite del motor
2. Minimum level mark
4. Engine oil filler cap
2. Repère de niveau minimum
2. Marca de nivel mínimo
5. Remove the engine oil filler cap and wipe off
the dipstick with a clean rag.
6. Insert the dipstick in the oil filler hole (without
screwing it in), and then remove it again to
check the oil level.
NOTE:
_
The engine oil should be between the minimum
and maximum level marks.
_
7. If the engine oil is at or below the minimum
level mark, add sufficient oil of the recom-
mended type to raise it to the correct level.
8. Insert the dipstick into the oil filler hole, and
then tighten the oil filler cap.
9. Install the console.
8-25
Publicité
