Publicité
Les langues disponibles
Les langues disponibles
Fig. 10:
Attaching the connecting bracket
Fig. 11:
Attaching more modules
Fig. 12:
Attaching the connecting bracket
Fig. 13:
Valve terminal ready for use
10
All manuals and user guides at all-guides.com
english
Type 8645
EXPANDING A VALVE TERMINAL
Step 8:
→
Push the blue locking bracket over the desig-
nated guides.
Ensure that the connecting bracket is inserted neatly
into the guides and is pushed down parallel.
→
To do this, support the bracket by gripping both
lugs.
Step 9:
→
If more modules are to be added, repeat steps
5 – 8.
In doing so, note the appropriate system limits. To
close the valve terminal, attach the cover module
which fits the corresponding head module.
→
Attach cover module by pressing parallel on the
valve terminal.
Ensure that O-rings, seals and electrical interface are
not damaged.
Schritt 10:
→
Lock locking pins according to Step 7 and push
down blue connecting bracket according to Step
8.
→
Re-attach FE rails.
→
Connect additional modules accordingly to the
FE contact.
Step 11:
The valve terminal is ready for use again!
Publicité
