Sharp AR-152E N Mode D'emploi page 8

OPERATION PANEL
Exposure mode selector key and
1
indicators
Use to sequentially select the exposure
modes: AUTO, MANUAL or PHOTO.
Selected mode is shown by a lit
indicator. (p.18)
Light and dark keys and indicators
2
Use to adjust the MANUAL or PHOTO
exposure level. Selected exposure level
is shown by a lit indicator. (p.18) Use to
start and terminate user program
setting. (p.22)
Alarm indicators
3
Developer replacement required
indicator (p.35)
Misfeed indicator (p.31)
Toner cartridge replacement
required indicator (p.24)
Maintenance indicator (p.35)
SPF indicator (p.17) (AR-153EN)
4
Can be used only when your unit has
the SPF.
SPF misfeed indicator (p.34)(AR-
5
153EN)
Can be used only when your unit has
the SPF.
Copy ratio selector key and
4 6
indicators
Use to sequentially select preset
reduction/enlargement copy ratios.
Selected copy ratio is shown by a lit
indicator. (p.20)
Copy ratio display (%) key (p.20)
5 7
Display
6 8
Displays the specified copy quantity,
zoom copy ratio, user program code,
and error code.
SCANNER key and indicator
7 9
(p.50, p.57)
Can be used when the Printer/Scanner
Expansion Kit (AL-12PKM) is installed.
6
AR-153E N
ONLINE key and indicator (p.50)
8 10
Can be used when the Printer/Scanner
Expansion Kit (AL-12PKM) is installed.
Power save indicator
9 11
Lights up when the unit is in a power
save mode. (p.21, p.22)
Paper feed location indicators
10 12
Light up to show the selected paper
feed station.
Tray select key (AR-153EN)
13
Use to select a paper feed station (paper
tray 1, paper tray 2 or multi-bypass tray)
p.20
( )
ZOOM keys and indicator
11 14
Use to select any reduction or
enlargement copy ratio from 25% to
400% in 1% increments. (p.20)
Copy quantity keys
12 15
• Use to select the desired copy
quantity (1 to 99). (p.18)
• Use to make user program entries.
(p.22)
Clear key
13 16
• Press to clear the display, or press
during a copy run to terminate
copying. (p.18)
• Press and hold down during standby
to display the total number of copies
made to date. (p.23)
Start key and indicator
14 17
• Copying is possible when the
indicator is on.
• Press to start copying.
• Use to set a user program. (p.22)