Publicité
Les langues disponibles
Les langues disponibles
About the scan head
The scan head lamp remains on constantly when the unit is in the ready condition
(when the start (
) indicator is illuminated).
The unit adjusts the scan head lamp periodically to maintain copying quality. At this
time, the scan head moves automatically. This is normal and does not indicate unit
trouble.
Initial settings of operation panel
When the unit power is on, the operation panel will revert to the initial settings when
the time set with the "Auto clear time" setting (p.21) elapses after a copy or scanner
job is finished, or when the clear (
The initial settings of the operation panel are shown below.
When copying is begun in this state, the settings in the following table are used.
Copy quantity
Exposure adjustment
Zoom
Tray
Power off methods
If not used for a certain period of time, the unit will automatically enter auto power
shut-off mode (p.22) in order to minimise power consumption. In cases where the
machine will not be used for a long time, turn off the power switch and remove the
power cord from the outlet.
) key is pressed twice.
AR-153E N
"0" is displayed in the display.
1 copy
AUTO
100%
Paper tray 1
3
15
Publicité
