8
FAUCET OPERATION
FEATURES
Safety Timer
• The faucet will automatically turn off the water after 2
minutes of continuous use. Momentarily place you
hand in front of the sensor to turn on the water.
•
With FAUCET on, press TOGGLE BUTTON (4) on
SPRAY (3) to switch from stream to spray.
• Press and hold PAUSE BUTTON (5) to temporarily
stop flow from SPRAY (3). Release PAUSE
BUTTON (5) to resume flow from SPRAY (3).
9
CHANGE SENSOR RANGE
• Disconnect the BLACK POWER SUPPLY
CONNECTOR (1) and reconnect.
• While the SENSOR CONTROL LED (2) is blinking
slowly, place your hand 1 - 2 in. (25.4-50.8mm) in
front of the sensor.
• When the LED stops blinking and stays "ON",
move your hand to the desired position and hold
in place until the LED begins to blink again.
• Once the SENSOR CONTROL LED (2) begins to
blink again, remove your hand from the detection
zone. When the flashing stops, the detection
distance is set.
5
STREAM (AERATOR)
3
4
SPRAY
2
1