Technical Data; Safety Instructions; General Power Tool Safety Warnings; Work Area Safety - Hilti DG 150 Mode D'emploi

4. Technical data

Nominal voltage
Nominal current
Power input
Power output
Mains frequency
Rated speed at setting no.1
Rated speed at setting no.2
Weight in accordance with EPTA 4.1 kg
procedure 01/2003
Dimensions (l×w×h)
Electrical protection class
Other significant characteristics of the appliance
Time to stop after switching off ≤ 2 sec.
Thermal overload protection
Restart safety interlock
Right of technical changes reserved

5. Safety instructions

5.1 General power tool safety warnings

WARNING! Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operat-
ed (cordless) power tool.

5.1.1 Work area safety

a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gas-
es or dust. Power tools create sparks which may ignite
the dust or fumes.
c) Keep children and bystanders away while operat-
ing a power tool. Distractions can cause you to lose
control.
4
Printed: 07.07.2013 | Doc-Nr: PUB / 5069654 / 000 / 00
DG 150 DPC 20
120 V
15 A
1800 W
1285 W
60 Hz
4700 /min
6600 /min
3.8 kg
(9.0 lbs) (8.4 lbs)
46×25×23 cm 27×22×15 cm
(18.1×9.8×9.1") (10.6×18.7×5.9")
Protection class II Z (double insulated)

5.1.2 Electrical safety

a) Power tool plugs must match the outlet. Never mod-
b) Avoid body contact with earthed or grounded sur-
c) Do not expose power tools to rain or wet conditions.
d) Do not abuse the cord. Never use the cord for car-
e) When operating a power tool outdoors, use an exten-
f) If operating a power tool in a damp location is unavoid-
ify the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric
shock.
faces, such as pipes, radiators, ranges and refrig-
erators. There is an increased risk of electric shock if
your body is earthed or grounded.
Water entering a power tool will increase the risk of
electric shock.
rying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk
of electric shock.
sion cord suitable for outdoor use. Use of a cord suit-
able for outdoor use reduces the risk of electric shock.
able, use a residual current device (RCD) protect-
ed supply. Use of an RCD reduces the risk of electric
shock.