Technical Data; Safety Instructions; Work Area Safety; Electrical Safety - Hilti DD AF-CA Mode D'emploi

1 Operating instructions
1 Cardboard box
NOTE
Accessories not supplied with the machine are available from your Hilti Center or can be ordered online at
www.hilti.com.
en

3 Technical data

Right of technical changes reserved.
Rated voltage
Rated frequency
Rated current input
Output voltage [DC]
Output current
Speed of rotation
Highest permissible water supply pressure
Minimum water flow rate per minute
Dimensions (L × W × H)
Weight, ready for use
Protection class
Protected against dust and water

4 Safety instructions

4.1 General Power Tool Safety Warnings
a)
WARNING
Read all safety warnings and instructions. Failure
to follow the warnings and instructions may result
in electric shock, fire and/or serious injury. Save all
warnings and instructions for future reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or battery-
operated (cordless) power tool.

4.1.1 Work area safety

a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operat-
ing a power tool. Distractions can cause you to lose
control.

4.1.2 Electrical safety

a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Un-
4
All manuals and user guides at all-guides.com
240 V
50...60 Hz
0.4 A
5 V
50 mA
0...75/min
Max. 6 bar (Max. 87.02 psi)
Min. 0.5 l (Min. 0.13 gal) (water temperature: Max.
+30°C (Max. +86 °F))
361 mm (14.21") × 193 mm (7.6") × 133 mm (5.24")
4.5 kg (9.92 lb)
I (grounded)
IP55
b) Avoid body contact with earthed or grounded
c) Do not expose power tools to rain or wet condi-
d) Do not abuse the cord. Never use the cord for
e) When operating a power tool outdoors, use an
f)

4.1.3 Personal safety

a) Stay alert, watch what you are doing and use
480 V
50...60 Hz
0.25 A
modified plugs and matching outlets will reduce risk
of electric shock.
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
tions. Water entering a power tool will increase the
risk of electric shock.
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk
of electric shock.
common sense when operating a power tool. Do