Technical Data - Hilti ST 2500 Mode D'emploi

3. Accessories and insert tools
Belt hook
Depth gauge S-GT 17 for screws with sealing washers of up to
17 mm dia.
Depth gauge S-GT 23 for screws with sealing washers of up to
23 mm dia.
Depth gauge S-GU 13 for 50 mm bit holder and bits
Depth gauge S-GU 11 for 75 mm bit holder and bits
Depth gauge S-GU 13 for 50 mm bit holder and bits
Depth gauge S-GUA 13 for 75 mm bit holder and bits, incl. bit and
bit holder removal aid
Sockets Sockets for hex. screws (7, 8, 10, 12,
Bits and bit S-BHP 75 M, S-BH 75 M and S-BH 50 M bit holders;
holders bits of the types TX, PH, PZ, SQ etc.
Screw magazine SMI 55 plus
Extension SME extension for working on floors and ceilings

4. Technical data

Tool
Rated power
Rated voltage
Rated current
Mains frequency
Weight as per EPTA-Procedure 01/2003
Dimensions (L×W×H)
Chuck
Speed under no load
Max. torque
Speed control
Forward / reverse
Double insulation (as per EN 60745)
Mechanical clutch
Vibration-absorbing grip
-NOTE-
The vibration emission level given in this information sheet has been measured in accordance with a standardised
test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assess-
ment of exposure. The declared vibration emission level represents the main applications of the tool. However if
the tool is used for different applications, with different accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure level over the total working period. An estimation of the
level of exposure to vibration should also take into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce the exposure level over the total working peri-
od. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the
tool and the accessories, keep the hands warm, organisation of work patterns.
Printed: 08.07.2013 | Doc-Nr: PUB / 5070743 / 000 / 01
All manuals and user guides at all-guides.com
1
ST 2500 / SD 2500
600 W (WH version (120 V) 670 W)
100 V, 110–120 V, 220–240 V
2.8 A at 230 V ( 6.1 A at 120 V)
50 / 60 Hz
1.5 kg (ST 2500)
1.6 kg (SD 2500)
(ST 2500) 242× 72×194 mm/(SD 2500) 272× 72×194 mm
" hex. socket (keyed hold) with ST 2500
1 /
4
" hex. socket (friction hold) with SD 2500
1 /
4
0–2200 r.p.m.
19 Nm
Electronic, by way of control switch
Pushbutton
Protection class II Z
", ", ")
/ 5 / 3 /
4 16 8
ST 2500 SD 2500
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔
✔
✔
13
en