Publicité
Les langues disponibles
Les langues disponibles
Wash and thoroughly dry the hood.
1
Lay Aeroskin in place on vehicle and mask off the
surrounding areas with tape.
3
Apply surface prep to painted surface where
Aeroskin will attach. Let dry.
5
2/6
Note the locations where tape on the back of Aero-
skin will contact hood surface. Center Aeroskin on
leading edge of hood surface and test fit. Use character
lines in hood surface to assist with proper placement.
2
Remove Aeroskin. Use alcohol pads to clean areas
where the tape on the back of the Aeroskin will contact
hood surface. Let dry.
4
Remove and discard masking tape.
6
Publicité
