Maintenance And Cleaning; Electric Shock - Abicor Binzel ALPHA FLUX 350 Mode D'emploi

9 Maintenance and cleaning

9 Maintenance and cleaning
9.1 Torch neck
EN - 12
Scheduled maintenance and cleaning is a prerequisite for a long life and a
trouble-free operation.
DANGER
Risk of injury due to unexpected start-up.
The following instructions must be adhered to throughout all maintenance,
servicing, assembly, disassembly and repair work:
• Switch off the power supply.
• Pull the mains plug.
DANGER

Electric shock

Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation.
• Replace any damaged, deformed or worn parts.
NOTICE
• The maintenance intervals given are standard values and refer to single-
shift operation.
• Maintenance and cleaning work may only be carried out by qualified
and trained specialists.
• Always wear your personal protective clothing when performing
maintenance and cleaning work.
DANGER
Risk of burns
Burns caused by hot parts (torch, welded parts).
• Allow the torch to cool down completely
1 Remove welding spatters from the contact tip, the insulator and the
protective shield and spray them with original ABICOR BINZEL anti-
spatter agent.
2 Check wear parts for visible damage and replace them, if required.
ALPHA FLUX