Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SKT 4 controller installed on the SPLIT heating element is the ba-
sic configuration of this type of heating element unit which allows
use of all the basic features of the device (see: Local mode operation).
Local mode operation (without IR transmitter)
Heating mode
In local mode, it is possible to set one of 10 settings values:
1 ... 9, correspond to the room temperature range from 20 ... 28
°C, the set value equal to 0 means that the device will not heat.
Changes settings are made using the
cates the current heating status.
Dryer mode (timer)
button is used to turn the mode on and set the time after which
the device is to be turned off automatically. In order to activate
the Dryer Mode:
• press
button shortly — display panel will show dryer working
time of 1H (1 hour),
• every subsequent pressing of the
SKT 4 controller can also cooperate with an external wall-mounted
transmitter (ie. DTIR or TTIR type), which adds additional features to
the basic set (see: Remote mode operation).
In order to deactivate the Dryer Mode, set the time to 0H (press the
While the Dryer Mode is active the number of hours remaining to
the end of the program is displayed (a digit and the letter H). During
/
keys. The
icon indi-
that time:
—
—
—
Actual working time meter
The unique feature measuring the actual working time of the heat-
button will prolong dryer
ing element adds up the periods during which the device was using
User Manual — Electric heating elements of the SKT series
working time (2-4 hours).
button a few times) or turn the device off and back on.
to see the set temperature press once any of the
to change the temperature setting press the
a few times,
press the
button to modify the time after which the Dryer
mode will be terminated.
/
buttons,
or
button
59
Publicité
Table des Matières
