Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Electric Heating Element
Safety requirements — installation
1. Fitting and connection of the heating element should only be per-
formed by a qualified installer.
2. Connect the unit to a sound electrical installation (see the ratings on
the heater).
3. Ensure that the power cord does not touch the hot parts of the heat-
ing element or radiator.
4. Before installing or removing the device, make sure it is disconnect-
ed from the power source.
5. Do not open the device — any interference with internal compo-
nents will invalidate the warranty.
40
User Manual — Electric heating elements of the SKT series
Publicité
Table des Matières
