Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SKT 3
Heating element heats the radiator that it is installed in and, at the
same time, controls room temperature. For temperature regula-
tion please use buttons
and
. LCD display panel shows current
temperature measured inside the radiator. After settings have been
modified, display panel will flash showing the newly set tempera-
ture for a few seconds and will go back to displaying current tem-
perature. Heating indicator
will come up on the display panel if
the newly set temperature is higher than the current one. In order
to see the set temperature, press one of the arrows on the display.
time settings (clock/dryer/timer)
on/off button
parameters regulation
active 24-hour timer
timer active zone code
clock
temperature
heating indicator
Construction of the device (PTC heating element) protects against
burning by restricting the temperature of the radiator to 60°C, re-
gardless of its current setting, (provided that the heat output of the
heating element has been properly matched with the heat output
of the radiator).
Construction of the device as well as physical characteristics of the
heating agent inside the radiator influence the way in which the heat
is distributed — the temperature of the bottom pipes of the radiator
(especially the two located at the very bottom of the radiator) may
User Manual — Electric heating elements of the SKT series
53
Publicité
Table des Matières
