Problem Solution - TERMA SKT 1 Mode D'emploi

TROUBLESHOOTING
Problem
Device is connected to
electricity, no diodes are
on, heating element
does not heat
Heating element does
not heat, both diodes are
flashing alternately
Device heats although it
has been turned off the
button
q
In any other situations, disconnect the device from electricity, wait for the
radiator to cool down and turn it back on again. If the problem persists, please
contact your local Distributor.
52
User Manual — Electric heating elements of the SKT series
Possible cause
Device is not turned on
Problem with connection
or power supply
Possible incorrect
installation of controller
on the heating element
Possible electronics
damage

Problem solution

Turn the device on with
the button
q
Check the connection of
the power supply wire.
Check if the voltage is
correct
Check if the controller
has been correctly
connected with the
heating element (casing
of the controller should
completely cover the
head of the heating
element)
Disconnect the device
completely from
electricity and wait until it
cools down, then turn it
back on again