Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Electric Heating Element
Safety requirements — installation
1. Fitting and connection of the heating element should only be performed
by a qualified installer.
2. Connect the unit to a sound electrical installation (see the ratings on the
heater).
3. Ensure that the power cord does not touch the hot parts of the heating
element or radiator.
4. Before installing or removing the device, make sure it is disconnected
from the power source.
5. Do not open the device — any interference with internal components
will invalidate the warranty.
6. The heating element's power output must not exceed the radiators pow-
er output for the parameters 75/65/20° C .
7. The pressure in the radiator should not exceed 10 atm. Ensure that an
air cushion is preserved in electric radiators. In central heating systems,
leave one valve open to prevent pressure build up due to the thermal
expansion of the liquid.
40
Publicité
Table des Matières
