Publicité
7. USING THE OPERATION PANEL
7. VERWENDUNG DER BEDIENUNGSTAFEL
7. UTILISATION DU PANNEAU DE COMMANDE
7. USO DEL TABLERO DE CONTROLES
7-2-3. Setting the zigzag base line position
The zigzag base line is the "center" of the zigzag stitch, or in other words, it is like a center line drawn through the
sewing pattern.
By moving the zigzag base line position, you can move the sewing pattern to the left and right within the maximum
range for the pattern width.
Zigzag width
Zigzag width
Base line
Base line
e
r
[L] or [r]
I Zigzag base line position indicator w
If the zigzag base line position has been set to something other than
will illuminate so that you can check whether the zigzag base line position has been set to a position other than the
center.
G Relationship between zigzag base line position and zigzag width (when the maximum zigzag width is 8 mm)
By way of example, consider a sewing pattern (Figure A) with a zigzag base line position set to
width set to
AA
AA. If the zigzag base line position is set to
edge (Figure B). The sewing pattern cannot move any further to the left even if a larger setting is made. (Even if the
zigzag base line position is set to
(Figure C.)
AA AA
However, in this case, if the zigzag width is set to
produced.
(8mm)
<Example>
A
4mm
Base line
-------- 0
-------- 4.0
Zigzag width
79
All manuals and user guides at all-guides.com
Zigzag width
Zigzag width
Base line
Base line
1338M
w
q
1439M
AA
AA, the sewing pattern position will be the same as if the setting had been
AA, a sewing pattern such as that shown in Figure D will be
AA
(8mm)
B
4mm
L2.0
4.0
ZE-855A,856A
Maximum zigzag width (8 mm)
Zigzag width 3mm
Base line 0
1. Press the zigzag base line position key q.
The indicator w will illuminate, and the zigzag base
line position currently set will flash on the LED display
e.
(For example,
AA AA
indicates that the pattern posi-
tion is 2.0 mm to the left, and
pattern position is 2.0 mm to the right.)
selection keys r to change the
2. Press the
and
zigzag base line position.
• If changing the setting from
numerals, and then set "L" or "r".
• Use the
selection keys to set [L] or [r] in the
second column from the left in the LED display e.
Note:
If the needle bar is at the needle up stop position, the
needle bar will move to the sewing start position when
the zigzag base line position is changed.
If the needle bar is not at the needle up stop position,
the needle bar will move to the sewing start position
after it next moves to the needle up stop position.
AA, the zigzag base line position indicator w
AA
AA
AA, the pattern will be moved over toward the left
(8mm)
C
D
4mm
L3.0
4.0
(8 mm)
3mm
Base line 0
2 mm to the left
Base line
1339M
AA AA
indicates that the
AA
AA, first change the
AA AA
and a zigzag
(8mm)
2mm
L3.0
2.0
1341M
Publicité
