Publicité
7. USING THE OPERATION PANEL
7. VERWENDUNG DER BEDIENUNGSTAFEL
7. UTILISATION DU PANNEAU DE COMMANDE
7. USO DEL TABLERO DE CONTROLES
r
(1~8)
(1~8)
(1~99)
(1~99)
(1~99)
71
All manuals and user guides at all-guides.com
w
q
t
1434M
ZE-855A,856A
e
I Setting the sewing pattern
1. Press the PATTERN key q.
The sewing pattern number that is currently set is dis-
played in the LED display w.
The PATTERN indicator e corresponding to this pat-
tern number also illuminates.
2. Press the PATTERN key q to select the pattern num-
ber.
The sewing pattern setting changes as shown in the
illustration at left each time the PATTERN key q is
pressed.
(For example, if the PATTERN key q is pressed when
the current setting is "2" (plain zigzag), the setting
changes to "3" (2-step zigzag).)
•
If no custom-made patterns have been set,
cannot be selected.
•
If setting scallop, blind stitch or custom-made sew-
ing patterns, refer to the setting details for each
pattern that appear on the following pages.
•
Furthermore, the sewing patterns can be changed
by pressing the leftmost
If you press the
selection key at this time, the
pattern number will change in reverse order.
Note:
If the needle bar is at the needle up stop position, the
needle bar will move to the sewing start position when
the sewing pattern settings are changed.
If the needle bar is not at the needle up stop position,
the needle bar will move to the sewing start position
after it next moves to the needle up stop position.
1433M
AAAAA
selection keys r.
Publicité
