Télécharger Imprimer la page

Fahl TRACHEOPORT COMPACT Mode D'emploi page 36

Publicité

Les langues disponibles
  • FR

Les langues disponibles

6.0
CLEANING, DISINFECTION, REPROCESSING
EN
Thermal disinfection is performed at a temperature
of 93°C.
The cleaning and maintenance instructions are the result of long
years of experience. Shorter cycles may be required, depending
on the application and the users' experiences.
The following consumables must be replaced in accordance
with the instructions given in Section 6.1 (Figure 8):
The device must be disconnected from the mains for
cleaning!
The instructions specified in the instructions for
Suction tube
approx. 1.80 m long
Figure 8
6.5
RECOMMENDED INSTRUMENT DISINFECTANTS
Disinfectant
GIGASEPT FF neu
(application concen-
trate)
Sekusept Plus
(application concen-
trate)
6.6
RECOMMENDED SURFACE DISINFECTANTS
Disinfectant
Dismozon pur steril
(granulate)
Kohrsolin FF
(application solution)
Mikrozid sensitive
wipes
(ready to use disinfec-
ting wipes)
Perform
(concentrate)
Bacillol 30 Foam
(application solution)
Mikrobac forte
(concentrate)
If disinfectants containing aldehyde and disinfectants containing amines are used on the same object, this can cause discolourations.
Bacterial filter
Ingredients
Succinic acid dialdehyde
Dimethoxy tetrahydrofurane
Phosphonates, anionic tensides, non-ionic tensi-
des, scents, methyl isothiazolinone
Glucoprotamin
Ingredients
Magnesium monoperoxyphthalate hexahydrate
Glutaral
Benzyl-C12-18-alkyldimethyl ammonium chlorides
Didecyl dimethyl ammonium chloride
Alkyl(C12-16)dimethylbenzylammoniumchlorid
(ADBAC/BKC (C12-16)); Didecyldimethylammoni-
umchlorid (DDAC),
Alkyl(C12-14)ethylbenzylammoniumchlorid
(ADEBAC (C12-C14))
Pentapotassium bis(peroxymonosulphate) bis
(sulphate)
Anionic tensides, non-ionic tensides, phosphona-
tes, soap, scents
Propane-1-ol
Propane-2-ol
Ethanol
Benzyl-C12-18-alkyldimethyl ammonium chlorides
N-(3-aminopropyl)-N-dodecylpropane-1,3-diamine
use must be observed, particularly as regards the
recommended agents.
6.4
DISINFECTION
The different device components can be disinfected with
specific disinfectants:
Suction tube (instrument disinfectant),
Secretion container (instrument disinfectant),
Container lid (instrument disinfectant),
Device surface (surface disinfectant).
In this regard, observe the instructions already mentioned
in this section as well as the disinfectant manufacturers'
instructions for use.
Thorough cleaning should always be performed prior to
disinfection, if such is required. As a general rule, disinfection
is advisable to prevent cross-infection and is also advisable if
the device is used in inpatient situations (e.g. hospitals, nursing
homes and/or other health care facilities), in order to limit the
risk of infections.
(in 100 g) Manufacturer
11.9 g
3.2 g
25.0 g
(in 100 g) Manufacturer
80 g
5 g
3 g
3 g
0,26 g
0,26 g
0,26 g
45 g
45 g
25 g
4.7 g
19.9 g
5 g
36
Schülke & Mayr GmbH,
Norderstedt
Ecolab Deutschland GmbH,
Düsseldorf
BODE Chemie GmbH, Hamburg
BODE Chemie GmbH, Hamburg
Schülke & Mayr GmbH,
Norderstedt
Schülke & Mayr GmbH,
Norderstedt
BODE Chemie GmbH, Hamburg
BODE Chemie GmbH, Hamburg

Publicité

loading