X-Rite DensiEye Mise En Route page 20

Qui c k Start Gui d e
E N G L I S H
16. Auto Mode (DensiEye 700 only)
This function automatically detects the Solid, Halftone, Trapping and Grey Balance measurement fields. To do this, the solid colour density fields must
first be measured in accordance with the printing sequence.
17. Warranty registration
In order to receive technical support, you need to register your new DensiEye
To register the DensiEye you can either complete and return the registration card or register it online at http://www.xrite.com.
18. Recertification
X-Rite recommends annual re-certification of the DensiEye reflectance densitometer.
Contact your X-Rite dealer or your nearest X-Rite Service Centre for more information on the recertification process.
19. Service
Never try to repair the X-Rite DensiEye yourself in any circumstances
All warranty claims are immediately invalidated if the device is opened without authorisation.
Contact X-Rite Support or your nearest X-Rite Service Centre if you think the device is no longer functioning or is not functioning correctly.
16
All manuals and user guides at all-guides.com
®
X-Rite DensiEye ™ Quick Start Guide