X-Rite DensiEye Mise En Route page 17

Message box
Messages as "White measurement done" and error messages will be displayed in the in the message box, within the output field.
Pass/Fail Indicator
Pass/Fail is indicated by a green and red LED on top of the measuring head next to the display for the functions Density, Dot Gain and Gray balance.
Pass/Fail information on the display
If the measured value is within tolerance a check mark behind the value is displayed.
If the measured value is out of tolerance an "arrow up" or "arrow down" will be displayed.
11. Function selection
• The required function is pre-selected in the menu using the Up/Down buttons
• Pressing the Enter button in the main menu opens the display window for the function
• Pressing the Enter button in a popup menu activates the selected setting
12. Symbol selection
• The required symbol is pre-selected using the Up/Down buttons
• Depending on the functionality of the symbols, as described in the previous chapters, the Enter button needs to be pressed or a
measurement initiated
®
X-Rite DensiEye ™ Quick Start Guide
All manuals and user guides at all-guides.com
Qui c k Start Gui d e
E N G L I S H
13