Subscribing A Handset To The Topcom Freeport Base Station; Subscribing A Handset To Another Dect; Base Station - Topcom Butler 2000 C Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Butler 2000 C
• When "PIN :" is
displayed, enter the PIN
code of the base unit (PIN
code = '0000').
• After entering the 4 digit PIN code, press the OK
button.
• The unit returns to the
"H-REGISTER" menu.
4.3 Subscribing a handset to the Topcom
Freeport base station

Base station

Put the Freeport base into subscribing mode, by
removing and reconnecting the adapter from your
Freeport. The antenna LED blinks on the Freeport
base. You now have 5 minutes to subscribe the
handset.
Handset
• P ress the Function button
until "H-REGISTER" is
shown on the display.
• Press the OK button.
• On the display "SEARCH
BS 1" is shown.
• Press the Function button.
• The base number changes from 1 to 4.
• As soon as the handset has found the correct
base number, press the OK button.
• When the handset is
looking for the base
unit, the RFPI Code is
displayed.
• Press the OK button.
• When "PIN : " is
displayed, enter the PIN
code of the base unit
(PIN code = '1111').
• After entering the 4 digit PIN code, press the OK
button.
• The unit returns to the
"H-REGISTER" menu.
4.4 Subscribing a handset to another DECT base
s t a t i o n
The DECT base has to be GAP compatible, other-
wise you will not be able to subscribe the Butler
2000C handset to this base.
Base station
Put the base in subscription mode. Refer to the user
manual of your DECT base. When the DECT base is
in subscription mode, go to the handset re g i s t r a t i o n .
PI N:
H - - R E G I S T E R
H - - R E G I S T E R
SEA RC H BS 1
00 00 4-00 1 AB
PIN :
H - - R E G I S T E R
43 43 43 43 43 43 43 43 43
* * * *
* * * *

Publicité

Table des Matières
loading

Table des Matières