Subscribing A Handset To A Base Station; Subscribing A Handset To The Butler2000/ 575/575+/Cocoon 100 Base Station; Subscribing A Handset To The Butler 565; Base Station - Topcom Butler 2000 C Mode D'emploi

Butler 2000 C
4 SUBSCRIBING A HANDSET TO A BASE
STATION
4.1 Subscribing a handset to the Butler 2000/
575/575+/Cocoon 100 base station
To be able to make and receive telephone calls, the
handset must be subscribed to the base unit. A new
handset can only be subscribed to the base unit
when the base unit is in subscription mode. Pre s s
and hold the Paging button for 15 secs until you
hear a beep tone. The base unit is now in subscrip-
tion mode.
• P ress the Function button
until "H-REGISTER" is
shown on the display.
• Press the OK button.
• On the display "SEARCH
BS 1" is shown.
• Press the Function button.
• The base number changes from 1 to 4.
• As soon as the handset has found the correct
base number, press the OK button.
• When the handset is
looking for the base
unit, the RFPI Code is
displayed.
• Press the OK button.
• When "PIN :" is displayed,
enter the PIN code of
the base unit
(PIN=1590).
• After entering the 4 digit PIN code, press the OK
button.
• The unit returns to the
"H-REGISTER" menu.
4.2 Subscribing a handset to the Butler 565 base
s t a t i o n
Press the Paging Button of the Butler 565 base unit
until you hear the registration tone. You hear the
registration tone for about 30 seconds. During this
period you can register the handset.
• P ress the Function button
until "H-REGISTER" is
shown on the display.
• Press the OK button.
• On the display "SEARCH
BS 1" is shown.
• Press the Function button.
• The base number changes from 1 to 4.
• As soon as the handset has found the correct
base number, press the OK button.
• When the handset is
looking for the base
unit, the RFPI Code is
displayed.
• Press the OK button.
H - - R E G I S T E R
SEAR CH BS 1
0 0004 -0 0 1AB
P IN:
H - - R E G I S T E R
H - - R E G I S T E R
S EAR CH BS 1
0 00 04 -00 1A B
42 42 42 42 42 42 42 42 42
* * * *