Ford VJL3Z-84501A42 Addendum page 5

STEP 4: Position the cover assembly onto the truck and position the rails.
NOTE: Prior to installing the cover, some drop-in
style bed liners may need to be notched in the front/cab
end corners to provide clearance for the cover canister.
Approximately
3" wide x 10" deep
4A- With two people, lift the cover and place it onto the truck bed
starting with the bulkhead.
The font seal of the cover should splay forward and lay flat.
Also ensure
that protrusions
or logos in the
drop-in liner
do not interfere
with the cover's
operation.
4B- Move the cover back toward the tailgate and use
the packing bracket as a spacer to position both rails
to be 1/4" from the tailgate.
Cab
NOTE: With the cover in place, the front
seal lays flat, but must also not extend
past the bed rail cap. Trim the seal
as needed to ensure it lays flat.
Cab
1/4",
6.35mm
Pg. 3